国产第一亚洲,√天堂8资源中文在线,国产春色

BYD Hand-pull Electric Forklift Operation Manual -

If you want to buy a cost-effective electric transporter with low price, good quality and good service, you should first refer to the production strength of the manufacturer

The following is shared by BYD forklift editor: 1

After forking the goods, it is lifted a short distance and then the mast returns to its original position along the track inside the leg

In the past few years, BYD Forklift has continued to make efforts and has been improving in parts selection, production process and key performance optimization, and manufacturing cost control

The fast-paced lifestyle and work mode have changed people's consumption patterns

Easy to operate: The explosion-proof electric forklift is driven by a hydraulic system

It uses a small-volume hydraulic device, which is simple to operate and easy to use

Check whether there is any fault in the drive motor system

(3) Parking: Stop the forklift by releasing the travel direction switch and returning it to the neutral position Specific performance parameters of AGV

Its unit is generally millimeters

It is strictly forbidden to use in blind areas; 9 Power Management: Equipped with the world's leading power management system to monitor the battery in real time, perform high-precision calculations on the charge status, ensure that the battery is always working in a safe state, and increase the battery cycle

The operation is simple and easy to use

In the Chinese market, major forklift brands have created one after another, as if overnight, today's forklift brands and consumers have a very imaginative demand for e-commerce logistics

BYD Hand-pull Electric Forklift Operation Manual -

Mechanism and principle: 1

Forklift products have a warranty of two years or 2,000 hours

This time, we will share with you how to successfully upgrade the drive device and improve the performance of electric forklifts

The overall design of the equipment conforms to ergonomics

The three verticals and three horizontals in the "New Energy Vehicle Industry Development Plan (2021-2035)", the "three verticals" refer to pure electric vehicles, plug-in hybrid vehicles, and fuel cell vehicles

In this case, we must pay attention to the battery temperature not being too low when charging the electric forklift in a low temperature area

The only variable is the minimum turning radius of the forklift, which is a value that companies need to pay special attention to

The models and configurations of the two equipment are different

Moreover, it has no environmental pollution, is small in size, and is light in weight, making it the most widely used battery on the market

(2) When a forklift encounters an obstacle, it should not force its way through

Electric warehouse forklifts are generally divided into two categories: handling and stacking

Prototype Testing First, the test plan of the prototype is formulated in detail according to the relevant parameter indicators, and then the indicators are tested in the actual application environment to see whether they meet the standards

Since lithium batteries use non-aqueous electrolyte solutions, there is no need to check and add electrolytes

BYD Hand-pull Electric Forklift Operation Manual -

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

The maximum lifting height [3] refers to the maximum vertical distance between the horizontal section of the fork or the upper surface of the lifting platform and the ground; the maximum deflection of the fork end refers to the maximum linear displacement of the fork end in the vertical direction when the fork is at rated load and maximum travel

There are many ways to classify forklifts: according to the structural type and characteristics of the forklift, the mass that the forklift can lift, the movement mode of the forklift, etc

The use of upright motors makes the inspection and maintenance of motors, brakes, etc

Due to the differences in the level of scientific and technological strength of various countries, there are also great differences in the application of new energy in forklifts

Finally, you also need to consider the brand, after-sales service, cost-effectiveness, etc

Clean the driving chain, bearings and add lubricating oil

When the electric pallet truck approaches the fixed place where the goods are placed, slowly lower the forks to ensure the stability of the goods

However, for the above-mentioned forklifts equipped with safety monitoring devices, the regular (initial) inspection shall include the corresponding items

, Ltd

Most warehouse forklifts can be raised to complete the transportation work at the height of the space

We recommend choosing a manufacturer with complete certificates and qualifications, which is more guaranteed

Warehouse forklifts are also the main tool for loading and unloading goods

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info