日韩欧美在,国产精品.com,麻豆影视国产在线观看

BYD four-wheel electric forklift which brand is better and cheaper- Mechanical structure To achieve synchronous lifting of hydraulic cylinders, mechanical synchronization is often the simplest and lowest-cost solution

If any abnormal condition is found in the forklift, stop and check it immediately

Do not turn it violently or accelerate suddenly

The soft brush should roll freely in the hand box

Check before use: (1) Check whether the fuel, lubricating oil, hydraulic oil and coolant are sufficient

Do not adjust parts during the operation of the equipment

Hydraulic system In terms of hydraulic synchronization, in order to avoid uneven loading of goods, uneven force on the four cylinders, and asynchronous movements, a gear-type hydraulic synchronous motor (also known as a split-flow motor) is designed at the center of the four cylinders

Daily maintenance is also very simple, and one person can complete the entire process, which has replaced the manual pallet truck to a certain extent

In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo He believes that, except for a few companies, the overall technical level of domestic lithium-ion forklifts is not high

The raised part will hit the timing gear on the camshaft, causing abnormal engine noise

3 During storage, it should be kept clean and avoid moisture and harsh climate environments

It uses battery power

We are a manufacturing company that develops and manufactures equipment handling products

BYD four-wheel electric forklift which brand is better and cheaper-

How to improve the working efficiency of forklifts, reduce customer maintenance costs and improve safety performance has been a hot topic for forklift manufacturers in recent years

Equipped with forklift drivers with forklift driving license to avoid having multiple drivers for one forklift

Electric truck manufacturers tell us that the advantages of electric pallet trucks are actually very obvious, and they can be used in various occasions

It has the characteristics of saving labor and time, running smoothly and reliably, low noise and no pollution

High safety

The third reason is that the charging and discharging current is too large or long-term overcharging causes the electrolyte temperature to be too high

When choosing, enterprises should consider their own operating requirements, budget, working environment and other conditions comprehensively to choose the most suitable truck

For example, batteries of different capacities, fork specifications, and even vehicle models can be customized according to the customer's working conditions

When the battery is arranged on the rear axle, the maintenance of the motor and hydraulic pump is more convenient, because after removing the battery and the pedal, the motor and hydraulic pump are clearly visible

Forklifts are widely used in warehouses, factories, ports, airports and other scenes

Maintenance-free: no need to add water, no dripping, corrosion and other environmental pollution

Cab: Since most electric forklifts are used for indoor handling, there is no enclosed cab, and only a protective overhead guard is installed7-3

BYD four-wheel electric forklift which brand is better and cheaper- have emerged on a large scale

The safety performance is much higher and it can operate for a long time, which greatly saves on labor costs

Features of wheels of various materials: 1

Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

What kind of faults usually occur when electric forklifts are in use? Electric forklifts, I believe everyone is familiar with them, right? Generally speaking, mechanical equipment will inevitably fail after long-term use, and electric forklifts are no exception

In applications that require very low noise, it is recommended to readjust the air gap within the maximum air gap range

Brushless DC motors are suitable for industrial new energy electric vehicles powered by batteries (or other DC power supplies), such as electric forklifts, electric rail-mounted flatbed trucks, rail-driven electric trucks, large tractors, etc

Next, let's see how to do it specifically

When we usually repair forklifts, we often find that many customers' forklifts are rusted or even corroded

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

There are specification restrictions for the use of electric pallet trucks and pallets

The equipment is equipped with an intelligent operating handle, which can be electrically lifted and moved, saving time and effort

To break this situation, we must take the path of differentiated competition

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info