久久人人澡,欧美日韩亚洲国产综合,特黄一级大片

BYD Battery Forklift Maintenance Manual - (4) The control arm moves downward from the uppermost position and should be between the uppermost and lowermost positions6 meters through structural design, which greatly improved the storage capacity rate of terminal warehousing Secondly, when picking up goods, the fork must be in place, one side of the goods must be attached to the fork, and the direction must be straight and not tilted The routes can be set in advance, and the unmanned forklift will work according to the set routes

Forklift drivers, please note: (1) Before moving the vehicle, make sure there are no people in front, behind, or around the vehicle, especially if there are obstacles around; (2) When driving, do not exceed the speed limit, slow down when turning, and point to confirm; (3) It is strictly prohibited to use shelves, material frames, etc

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

When the electric transport truck is not in use, put the fork to the bottom and store it in a designated location without affecting other operations

At the same time, manufacturers are encouraged to actively promote product upgrades and install safety monitoring devices in advance

There is a 5G-based wireless remote control device for scissor lifts

75 times, the motor can work normally

In other words, for the same rental day, it can work for several more hours or even several times longer than lead-acid batteries; 3

How to operate a BYD forklift? Operating a BYD forklift is a technical job that requires certain knowledge and skills However, although the electric lifting equipment produced by foreign manufacturers in the past was of good quality, it was too expensive to be popularized

BYD Battery Forklift Maintenance Manual -

The fork deflection test of the prototype is not higher than the 40mm designed in this article

The cameras are all installed wirelessly and magnetically, which makes installation very easy! As we all know, as a warehousing and logistics equipment, the main function of electric forklifts is the loading, unloading and transportation of goods Use your thumb to slowly turn the direction speed control button backwards

Counterbalanced Forklift AGV As human resource costs continue to rise, more and more factories have established their own automated production lines

Sharp turns are prohibited to reduce the impact force when turning to prevent the connection between the rigid structural parts of the enterprise from breaking

Relevant data show that after years of technological accumulation and continuous R&D investment, domestic brands have gradually aligned their product line integrity and technical quality management with international industry standards, and are cost-effective

Because of the obvious advantages, forklift trucks are now being deployed one after another, and hydrogen fuel cell forklifts will definitely be the main direction of forklift transformation in the future

0-8

But now technological development has offset some of its shortcomings

Forklifts can be divided into three categories: internal combustion forklifts, electric forklifts and warehouse forklifts

It can also enter the cabins, carriages and containers to load and unload and transport palletized goods

Check whether the connection of the motor unit outlet (or terminal) is correct and reliable

The sprocket should rotate flexibly

Taking the lifting device as the research object, as shown in Figure 3-(a), it mainly includes a front lifting gantry 1, a rear lifting gantry 2 and a two-way telescopic fork 3

It is strictly prohibited to park in the aisle or in places with uneven slopes

BYD Battery Forklift Maintenance Manual - When adding water, it must not exceed the bottom of the distilled water bottle!!! 4

What are the main considerations when choosing a pallet for an electric transport truck? We first need to consider the specifications and dimensions of the goods, such as the size of the outer packaging of the goods, the way it is placed on the pallet, and the weight and height of the goods

1-day inspection ① Check whether the battery is fully charged (you can also check the side surface of the battery)

At lower temperatures, higher relative humidity is allowed

(12) When a forklift is carrying cargo downhill, it should drive in reverse to prevent the cargo from falling off

With the rapid development of e-commerce, the requirements for forklift equipment are getting higher and higher

The main feature is that in order to overcome the overturning moment generated by the goods, a counterweight is installed at the tail of the forklift

This idea is too one-sided

Terms such as rated load, maximum lifting height, channel width, etc

The first reason is that the battery plates are oxidized

Warehouse work is increasingly inseparable from 3-ton electric forklifts, because the introduction of electric equipment will greatly improve work efficiency and save costs

Non-contact switches are used as much as possible, and cables are covered with special rubber skin to prevent hardening and deterioration to maintain the stability of the forklift

Therefore, lithium battery forklifts have many advantages

Stacking forklifts have a gantry, but unlike other lifting forklifts, they do not have a cab, mainly for flexible handling and stacking operations

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info